|
To ensure safe and efficient site operations, your operators must monitor numerous components. Enhance your operation's efficiency with the help of West Country Energy Services and the power of AI.
West Country Energy Services is the Canadian authorized reseller of Clean Connect.AI. We provide cutting edge AI technology with data collected from thermal, OGI, and other cameras and sensors, helping you produce clean energy at a profit.
Real-Time VOC Leak Detection
Thanks to our Clean Connect.AI solution, you will receive the same OGI accuracy as the hand-held OGI Cameras used for required LDAR inspections but with the addition of accurate visual verifications on a continual basis without callouts across your entire site.
Meets all regulatory requirements:
The Clean Connect.AI solution meets and exceeds all regulatory requirements. We can provide continuous VOC leak detection on your site.
Autonomous 360-degree coverage:
Placed on a pan-tilt mount inside an IP67 enclosure (intrinsically safe for outdoor use), an OGI camera can cover 300’ in every direction.
Visual Detection Of all VOC including Methane:
All Volatile Organic Compounds and Hazardous Air Pollutants can be visually detected by the OGI camera.
Never open your hatch when you use Clean Connect.AI’s non-invasive tank level monitoring that is as accurate as guided wave radar.
Inherently safe:
Significantly improve safety by eliminating the need to hand open a thief hatch or hand gauge a tank.
Use IR cameras for non-invasive tank level monitoring:
Using certified thermal cameras, we can detect liquid levels on the outside of the tanks.
Scada integrated:
We transmit telemetry data directly to your SCADA system that mimics guided wave radar. Clean Connect.AI machine model detects accuracy within 1% of guided wave radar.
Use Clean Connect.AI technology to detect liquid leaks before costly disasters strike.
Dump washouts (separators):
Incinerator emissions are one of the highest ranking emitters behind tank and other leaks.
Valve cracks:
Combining 360o optical camera and the OGI camera, incinerators can be simultaneously monitored for errant behaviours.
High-pressure pinhole leaks:
Leverage Clean Connect.AI's Autonomous365 to eliminate remote service calls and potential regulatory fines. Use the OGI Camera to verify that your incinerator is performing properly, including pilot light and VOC gas emissions.
Meet safety requirements by using AI to automatically detect if everyone on your site is wearing their hard hat.
Detect people anywhere on your site:
Using high-definition optical cameras to detect people, then zoom in on their movement.
Detects hard hat:
Clean Connect.AI is constantly working towards meeting clients' requests to include more PPE recognition.
Identify head movement:
The AI machine automatically identifies heads to see if a hard hat is being worn.
Flag & record:
As with all Clean Connect.AI machine models, events are automatically recorded to your SCADA system & custom alert dashboards.
Using virtual gate guards, you can reduce or eliminate the use of gate operators.
Detects vehicles:
Record all vehicles entering & leaving your site and maintain the timestamped log in the cloud forever.
Accurately reads license plates:
Using Clean Connect.AI’s specialty license plate reader (LPR) camera, license plates can be read with an accuracy rate of 98% during the day or night.
Autonomously compare activity to authorized vehicle list:
You are enabled to create an authorized and unauthorized list of license plate numbers that Clean Connect.AI’s machine model can work autonomously.
Notify & autonomously control site gate:
After verifying the license plate against your authorized/unauthorized list, a notification can be sent to a remote operator or simply open/shut the gate.
Visually verify that your Incinerators are working properly using our 360o HD optical camera.
Dump washouts:
Dump washouts are common causes of incinerator smoking. Detection of incinerator emissions can avoid systemic (and costly) complications.
OGI & HD visible coverage:
By combining a 360o OGI camera and optical camera, you will be able to simultaneously monitor your incinerators for errant behaviour.
Monitor for non-combustion:
By leveraging a Clean Connect Autonomous365, we can use an OGI Camera to verify that your incinerator is functioning properly, including pilot light, and VOC gas emissions.
Automatically have your pumper truck loadouts recorded and logged.
Meets all regulatory requirements:
Our Loadout Observations help you meet AER Directive 17 requirements and contribute to load volume verification and accuracy at terminals and batteries.
360o Autonomous coverage:
By placing the OGI camera on a pan-tilt mount inside a IP67 enclosure (intrinsically safe for outdoor use), we cover 300’ in all directions (600’ Diameter)
Autonomous 365 AI Suite:
The Clean Connect loadout observation AI machine model is part of their Autonomous365 AI suite. It is automated so you will never have to do late night call outs just to observe pumper trucks.
Detect smoke & fire autonomously using our 360o HD camera.
Record and flag:
All Clean Connect.AI machine models will automatically record any events and send them to your SCADA system and custom alert dashboards.
Instantly detect compressor run status and avoid costly failures or downtime using the Clean Connect.AI compressor monitoring AI machine model that runs 24/7.
Continuously listening:
The Clean Connect AI machine model is trained to listen for normal sounding compressors; therefore, it is able to detect any abnormal behaviour.
Compressor run status:
Based on the Clean Connect.AI Machine Models their AI can tell within seconds a compressors’ run status.
Avoid costly failures and downtime by instantly detecting pop-off events.
Audible pop-off detection:
The pop-off is a safety device used to prevent over pressurization and ‘reseal' once the pressure has dropped below a certain point.
Energy AI leverages advanced AI technology from Clean Connect.AI to provide comprehensive site monitoring for emissions, liquid leaks, PPE compliance, and more. It uses real-time data from cameras and sensors to enhance safety, efficiency, and regulatory compliance.
Energy AI employs Optical Gas Imaging (OGI) cameras and Clean Connect.AI’s VOC Gas Detection technology to identify leaks in real time. This system offers a 360-degree view, helping reduce emissions and ensuring compliance, so there are no inaccuracies like with traditional methods.
Yes, Energy AI includes PPE Detection capabilities that automatically identify if personnel are wearing required safety gear, like hard hats. This feature improves safety culture and helps prevent incidents by monitoring compliance continuously.
The system includes non-invasive tank level monitoring using infrared cameras, similar in accuracy to guided wave radar, which eliminates the need for manual inspections. Additionally, it provides compressor monitoring to detect operational status and prevent failures, enhancing preventive maintenance and operational awareness.
Energy AI includes various Clean Connect.AI technologies such as Flame & Smoke Detection, Liquid Leak Detection, Autonomous Gate Guard for site security, and continuous ECD monitoring. These features work together to improve site safety, operational efficiency, and compliance with environmental regulations.
Contact West Country Energy Services to discuss your specific requirements. Our team will help you implement Energy AI solutions tailored to your operational needs and compliance goals.
